Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.

emmi-nail

Milling cutter B6 with battery - 35,000 rpm.

279,00 € 349,00 €
Save 20%

Tax included. Shipping calculated at checkout

SKU: 18650
Quantity:
Kostenloser Versand in DE ab 30 € Sofort lieferbar
Highlights
  • ✔Studio quality
  • ✔Battery operated
  • ✔Powerful 35,000 revolutions
  • ✔Ideal for removing gel and acrylic
  • ✔Right/left rotation

B6 nail drill with battery - ideal for professional work in nail salons

This professional cordless nail drill is extremely lightweight and, thanks to its integrated lithium-ion battery, can be used both for mobile work and on your nail table in the salon. You'll also be impressed by the low-vibration and very quiet handpiece. This high-performance cordless nail drill is specifically designed for professional manicures and pedicures, as it boasts a particularly powerful speed with a high rotational speed per minute. This ensures that even stubborn nail enhancements can be treated with minimal effort.


✔ Studio quality
✔ Battery operated
✔ Powerful 35,000 revolutions
✔ Ideal for removing gel and acrylic
✔ Right/left rotation
✔ Quick-release system for fast bit changes


➠ User manual


Technical data:

  • Handle size: 133mm, Ø19mm
  • Control unit dimensions (L x W x H): 131 x 76 x 27 mm
  • Lithium-ion battery: 2500 mAh
  • Handle weight: 170g
  • Control unit weight: 393g
  • Speed: max. 35,000 rpm
  • Wattage: 48 watts
  • Power supply: AC 220/240 V
  • Mains frequency: 50/60 Hz

Included in the delivery:

  • control unit
  • handpiece
  • Handset holder
  • hip support
  • Handle mount
  • power supply

Changing the bit on a milling cutter:

  1. Disconnect the device from the power supply
    Unplug the power cord or remove the battery.
  2. quick-release fastener twist
    Turn the handpiece clockwise at the quick-release fastener. (exceed the noticeable resistance)
  3. Pull out the old bit
    Carefully pull out of the collet.
  4. Insert new bit
    Insert to approximately 2-4mm before the stop (not quite to the stop).
  5. Tighten quick-release fastener
    Turn the handpiece counterclockwise at the quick-release fastener.
  6. Check seat
    Check that it is securely fastened.

⚠️ Only then should you reconnect the device and perform a short test run.

WEEE Reg. No. DE65313320